Effect of microwave pre-treatment on physical quality,bioactive compounds,safety risk factor,and storage stability of peanut butter

Microwave, as a new heat treatment technology, has the characteristics of uniform and fast heating speed. It is an energy-saving technology known for improving oilseed product quality. Its efficiency mainly depends on the roasting power and time. However, the production of high-quality peanut butter using short-time roasting conditions are limited. Herein, we determined an appropriate microwave roasting power and time for peanuts and evaluated its impacts on the quality of peanut butter. Different roasting powers (400 ​W, 800 ​W and 1200 ​W) and times (4, 4.5, 5, and 5.5 ​min) were preliminarily tested. Among them, 800 ​W at 5 ​min was the most suitable. The roasting efficiency was further evaluated using color, sensory, bioactive compounds, storage stability, and safety risk factors of peanut butter produced from four peanut cultivars (Silihong, Baisha-1016, Yuanza-9102, and Yuhua-9414). The pre-treated butter obtained from three cultivars (Silihong, Yuanza-9102, and Yuhua-9414) with moisture content between 5% and 7.2% had a similar sensory score (6–7) as the commercial on a 9-point hedonic scale compare to the other. The color of the pre-treated peanut butter varies statistically with the commercial but remained in the recommended range of Hunter L1 values of 51–52, respectively, for high initial moisture peanut cultivars. The total polyphenol (35.20-31.59 ​± ​0.59 ​μmol GAE/g) and tocopherol (19.05 ​± ​0.35 ​mg/100 ​g) content in the butter obtained from three cultivars (Yuahua-9102, Yuhua, and Baisha-1016) and Silihong respectively, were significantly (P ​< ​0.05) higher than those in the commercial butter. The induction times of all pre-treated butter (19.80 ​± ​0.99–7.84 ​± ​0.07 ​h) were significantly (P ​< ​0.05) longer during storage at accelerated temperature than commercial samples. In addition, no benzo[a]pyrene was found in the pre-treated samples. Collectively, the microwave pretreated peanut butter was superior to the commercial one. These findings provided data support and a reference basis to promote microwave use for peanut butter production.     

凤梨草莓与黄毛草莓种间杂种果实香气成分的代谢谱分析

【目的】通过比较黄毛草莓和凤梨草莓的2个种间杂种PF（具黄毛草莓浓郁的蜜桃香气）和NF（无蜜桃香气）完熟期果实香气成分的代谢谱,为黄毛草莓蜜桃香气特征成分鉴定及野生草莓优异资源的开发利用提供参考。【方法】采用顶空固相微萃取和气相色谱/质谱联用技术（gas chromatograph tandem mass spectrometer technology,GC-MS）,对供试材料的香气成分进行检测。采用偏最小二乘法判别分析（partial least squares discrimination analysis,PLS-DA）模型第一主成分的变量投影重要度（variable importance in the projection,VIP）值和log2FC（Fold Change,FC）,结合T-test的P值来筛选差异性代谢物,PF相对于NF,设置阈值VIP>1.0, log2FC>1.0或log2FC<-1.0且P value<0.05,差异代谢物的相对含量采用峰面积归一化法计算,CAS号（Chemical Abstracts Service Registry Number）在https://pubchem.ncbi.nlm.nih.gov网站查阅。【结果】从检测到的383种总代谢物中筛选出67种差异代谢物,其中58种上调,9种下调,上调幅度较大的差异代谢物为内酯类物质,log2FC排在前3名的依次是(Z)-7-癸烯-5-酸（5.60）、丁位十一内酯（5.33）、δ-癸内酯（5.30）,下调幅度较大的差异代谢物为酯类物质,-log2FC排在前3名的依次是肉桂酸乙酯、亚硫酸（-7.19）,2-乙基己基异己酯（-6.65）和3-羟基丁酸乙酯（-4.14）。从相对含量来看,酯类在PF（37.69%）中大幅低于NF（57.20%）,内酯类在PF（20.91%）中大幅高于NF（6.12%）,酮类在PF（15.30%）中略高于NF（9.12%）,醇类、醛类、酸类、烯烃类和其他代谢物在PF和NF中的含量相当,NF中相对含量最大的酯是丁酸乙酯（17.92%）,PF中相对含量最大的内酯是δ-癸内酯（12.53%）,PF相对含量最大的酮与NF相同,均为2-庚酮。【结论】肉桂酸乙酯、丁酸乙酯和3-羟基丁酸乙酯等酯类可能是NF的关键香气成分,(Z)-7-癸烯-5-酸、丁位十一内酯和δ-癸内酯等内酯类可能是形成PF蜜桃香气的关键物质。     

Larviculture of the painted river prawn Macrobrachium carcinus in different culture systems

The objective of this study was to evaluate different hatchery systems used for the larviculture of the Macrobrachium carcinus based on survival, larval development and production of post-larvae. The experimental culture was carried out in three phases designated as Phase I (Zoea VI to VIII – Z_{VI – VIII}), Phase II (Zoea VIII to X – Z_{VIII – X}), and Phase III (Zoea X to PL – Z_{X – PL}), with densities of 30, 27.5 and 25 larvae / L, respectively. The M. carcinus larvae (Z_VI) were reared in four culture systems, two being open (Greenwater – GW and Clearwater – CW) and two being closed (Biofloc – BFT and Bio-filter – RAS), distributed in twelve 10 L plastic containers, filled with 20 ppt brackish water, equipped with constant aeration, and water circulated by air lift and heated with thermostat (∼30 °C). The GW treatment was maintained with Chlorophyceae algae in the density of 3–5 × 10⁵ cells/mL. In the CW, the water was previously filtered through a 5 μm mesh screen, sterilized with 10 ppm active chlorine and, dechlorinated with vitamin C and subjected to aeration for 24 h. The BFT received water rich in bioflocs that was matured prior to the experiment and used molasses as a source of organic carbon. In the RAS, the culture water circulated through an external “Dry-Wet” biological filter. The feeding was carried out ad libitum four times daily, alternating a wet diet formula with a commercial diet, which was supplemented with newly hatched Artemia nauplii at a rate of 40–50 per larvae/day. Temperature, dissolved oxygen and pH were monitored daily and the salinity two times per week. Total ammonia, nitrite, nitrate, orthophosphate, alkalinity, total suspended solids, chlorophyll-a, COD and BOD were also analyzed. The best water quality (P < 0.05) was obtained in the RAS, with 0.49 (±0.38), 0.23 (±0.22), and 9.0 (±1.5) mg/L of TAN, NO₂-N and NO₃-N, respectively. In the GW, the nitrogen species showed high fluctuations and higher concentrations at 2.32 (±1.68), 3.53 (±3.53) and 18.2 (±12.9) mg / L of TAN, NO₂-N and NO₃-N, respectively. Considering the three phases (Z_{VI – PL}), the overall survival was 0.03, 1.97, 2.23 and 17.32 % for the BFT, CW, GW and RAS, respectively. When considering the phases separately, the survival in Phase I (Z_{VI – VIII}) was highest in the GW system at 58.7 % while the RAS was the highest in Phases II (Z_{VIII – X}) and III (Z_{X – PL}) at 70.6 % and 60.3 %, respectively. The BFT showed 8.4 (±3.5) PL/L, which was higher (P < 0.05) than that obtained in the RAS (2.8 ± 1.2 PL/L) and the GW (1.3 ± 1.1 PL/L) and similar to that obtained in the CW (5.6 ± 2.0 PL/L). Thus, the larviculture for the M. carcinus may be optimized by adopting a multiphase management strategy, which the intermediate larval stages (Z_{VI – IX}) are reared in the GW system and the final stages (Z_{X – PL}) are reared in the BFT system.     

新疆‘晚丰’巴旦木花粉萌发培养基组分的筛选

为提高人工授粉中巴旦木的产量,本研究采用花粉离体培养法,筛选新疆‘晚丰’巴旦木品种花粉萌发中不同培养基组分的配方施用量,研究不同培养基配方组分对花粉萌发的影响。实验中在培养基内添加尿素、硼酸、氯化钙、吲哚乙酸、赤霉素和蔗糖,均能促进花粉萌发和花粉管生长,在一定范围内,花粉萌发率和花粉管长度均随培养基配方组份量的增加而增加,但超过一定添加量时,促进作用逐渐减弱并出现抑制作用。研究结果显示:添加0.1%尿素、0.01%硼酸、0.005%氯化钙、0.0001%吲哚乙酸、0.0015%赤霉素和10%蔗糖时,新疆‘晚丰’巴旦木品种花粉萌发率最高,花粉管长度也达到最大值。本研究结果为实践生产中人工授粉和相关研究提供参考和理论依据,也为进一步顺利进行亲和授粉研究提供前期理论基础。     

The effects of density and artificial substrate on intensive shrimp Litopenaeus vannamei nursery production

Recirculating aquaculture systems (RAS) can be installed indoors, allowing year-round production of tropical animals in nearly any climate. A nursery phase is commonly used in Litopenaeus vannamei production since it allows for enhanced biosecurity and better quantification of animals while reducing space requirements. However, it is unclear whether animal density and inclusion of artificial substrate may improve shrimp performance during the nursery phase. In this experiment, we compared shrimp production parameters in two stocking densities with or without the use of an artificial substrate by creating four treatments: low-density LD; 1500 PL/m⁻³, low-density with substrate LDS, high-density HD; 3000 PL/m⁻³), and high-density with substrate (HDS). The LDS and HDS treatments included 0.46-m² of high-density polyethylene 2.5-cm mesh as a substrate, which increased the tank surface area by 21 %. Each treatment was randomly assigned to four 160-l culture tanks, each with a biofilter. The shrimp had an initial weight of 4 mg and were grown for 50 days. The low-density treatments had significantly higher dissolved oxygen (DO) and pH than the high-density treatments (P ≤ 0.001). Specifically, LDS had the highest DO and pH followed by the LD, HD, and HDS treatments, respectively. High-density treatments had significantly higher NO₂-N levels than low-density treatments during week 2 of the experiment when an unusually high concentration of nitrite was observed. FCR was significantly lower in both low-density treatments than in high-density treatments. At harvest, the total biomass (kg m⁻³) was significantly higher in high-density treatments than in low-density treatments (P ≤ 0.001), and the HDS treatment had a significantly greater biomass output than HD. Producers should consider artificial substrate and higher densities during nursery production to maximize shrimp production; however, the effects on water quality should also be taken into account.     

不同加工处理方式对芝麻油风味的影响研究

以传统作坊式水代法芝麻油、传统作坊式压榨芝麻油、商品芝麻油为研究对象，采用顶空固相微萃取与气质联用技术（HS-SPME-GC/MS）和聚类分析对不同芝麻油挥发性化合物进行了检测和系统对比。结果表明：通过聚类分析，发现水代芝麻油和商品芝麻油的挥发性化合物组成相似程度更高；此外，芝麻油中吡嗪类化合物、含硫杂环化合物和苯系物因不同加工处理方式的差异显示出较大变化，其中3-乙基-2,5-二甲基吡嗪、4-甲基噻唑、愈创木酚等可作为区别三种芝麻油的关键风味物质。     

黑木耳功能性成分及其干燥技术研究进展

本文综述了黑木耳功能性成分以及干燥技术的研究进展，以期为黑木耳干燥技术的选取、应用和黑木耳产品开发的方向提供更多的参考。     

烤烟EMS诱变后代高香气突变体筛选

为筛选高香气且品质较优的烤烟后代,以中烟100为材料,采用EMS诱变技术对中烟100种子进行处理,筛选出2个叶面腺毛密度大的突变体材料,通过田间试验,对其叶面腺毛密度、叶面化学成分、烤后化学成分、香气物质含量和感官质量评吸等指标进行评估,并与正常中烟100后代和NC89进行对照。研究结果表明,EMS-2诱变株系腺毛密度最大,为65.55个/mm ²,分别是中烟100（37.19个/mm ²）和NC89（56.06个/mm ²）的1.8和1.2倍;叶面化学成分分析结果表明,EMS-1诱变株系西柏烷类和烷烃类含量最多,分别为57.18、5.16mg/m ²,EMS-2突变株系蔗糖酯类物质分泌较旺盛,含量最多,为0.33mg/m ²;烤后样化学成分分析结果表明,EMS-2突变株系化学成分含量较协调,且香气成分含量最多,达到890.32μg/g,分别比中烟100和NC89增加34.5%和29.0%;结合对诱变后代的感官评价,得出结论：诱变株系综合品质较好,可提高烟叶质量,EMS-2综合品质最好,可以作为待选株系进行下一步品种选育。     

氨氮胁迫对凡纳滨对虾肠道免疫相关指标的影响

为研究急性氨氮胁迫对凡纳滨对虾(Litopenaeus vannamei)肠道免疫功能的影响,将对虾暴露于氨氮浓度为20 mg·L^-1的海水中72 h,测定了不同时间点肠道中抗病原感染指标如酸性磷酸酶(ACP)、碱性磷酸酶(ALP)、溶菌酶(Lys)、酚氧化酶原(proPO)以及抗氧化功能指标如总抗氧化能力(T-AOC)、超氧化物歧化酶(SOD)、热休克蛋白70(HSP70)、热休克蛋白90(HSP90)等变化。结果显示,与对照组相比,氨氮胁迫后:1)ACP和ALP活性均于6 h显著升高(P<0.05),随后于48~72 h显著低于对照组(P<0.05);Lys活性于24 h显著升高至最大值(P<0.05),随后于72 h显著低于对照组(P<0.05)。2)T-AOC和SOD活性均于6 h和12 h显著高于对照组(P<0.05),随后于48 h和72 h显著降低(P<0.05)。3)HSP70基因表达水平于24 h显著升高至最大值,随后虽有降低,但仍显著高于对照组(P<0.05);HSP90和proPO基因表达水平均于12 h显著升高至最大值(P<0.05),随后于72 h降低至对照组水平(P>0.05)。研究表明,急性氨氮胁迫对凡纳滨对虾肠道免疫功能相关指标影响显著,对其肠道免疫防御系统有明显的损伤作用。     

濒危中华鲟人工群体的繁殖生物学

以1998―2008年孵出的子一代(F1)中华鲟(Acipensersinensis)为材料,研究了人工养殖中华鲟的繁殖生物学特征。结果表明:年龄10～20龄的492尾人工养殖子一代中华鲟体重为30～169 kg,体长为140～258 cm,肥满度为0.77～1.26,体长(L)与体重(W)之间的关系式为W=1×10~(–5)L~(2.9658) (R~2=0.9076,n=492)。74尾中华鲟性腺发育成熟,成熟比例为15.04%,成熟个体中雄鱼体重[(60.73±14.53)kg]和体长[(172.27±13.46)cm]均小于雌鱼体重[(88.39±29.14)kg]和体长[(193.37±18.90) cm];雄鱼最小性成熟年龄为10龄,平均为(14.96±1.93)龄,雌鱼最小成熟年龄为12龄,平均为(17.84±1.80)龄。雄鱼催产成功率为76.36%,精子快速运动时间为(49.11±13.38) s,精子寿命为(220.75±56.47)s;雌鱼催产成功率为57.89%,产卵量为(13.43±6.79)万粒,卵径(3.97±0.15)mm,卵重(0.046±0.013)g,受精率为(42.72±27.82)%,孵化率为(51.61±32.41)%,出苗量为(4.44±5.67)万尾。与野生中华鲟相比,人工养殖中华鲟成熟个体体格、繁殖力和繁殖效果均有下降趋势,人工保种面临挑战。